Howtoeliminatethepossibledefectsinthetransportationofmetalshredder?

Scrap processing is the national key solution and support of energy-saving emission reduction projects, 80 metal shredding machine is the key of the iron and steel scrap processing equipment, with the increasing of scrap steel resources, metal shredding machine has good application prospects. The machine is supplied by the manufacturer after assembly, and the user has received the inspection to eliminate the defects that may arise during the transportation process.

 

1, because of the large amount of vibration when the machine work, therefore, suggest that the machine is installed on the concrete foundation, in order to reduce vibration, noise and vibration absorption in order to avoid vibration of machine work affect the structure of the foundation, the best in the middle of the crusher and concrete foundation mat to hardwood plate, rubber belt or other vibrating materials.

 

2. The foundation weight shall be approximately 5 to 10 times the weight of the machine, and the depth of the foundation shall be greater than the depth of the frozen ground of the site about the installation of the machine and the position of the foot screw.

 

3. Before adjusting the discharging port, loosen the tension spring and adjust the tensioning of the spring properly to prevent the bracket from falling off at work.