Raymond mill
  • Raymond mill
  • Raymond mill

Raymond mill

Made in China

  • Operating Weight: 1.5 T
  • Engine Power: 10 Kw
  • Bucket Capacity: 30 MM
  • Our products are of superior quality and reasonable price!
  • 24-Hours Online!
  • Global Service Network
  • Professional technical support
This machine is widely used in the quartz, re-crystallization, calcite, potassium feldspar, talc, marble, limestone, dolomite, fluorite, lime, activated clay, activated carbon, bentonite, kaolin, cement, phosphate rock, gypsum, graphite, glass, titanium ore, copper ore, chrome ore, manganese ore, refractory materials, insulation materials, carbon black, clay, iron oxide mok's hardness below 9.3 and moisture below 6% of non flammable and explosive mining, construction, chemical industry, fertilizer and other industries more than 300 kinds of materials of high fine milling processing, finished product granularity in 60-325 mesh (0.125 mm to 0.044 mm), within the scope of the fineness according to need a few materials at up to 1000 mesh (0.013 mm).
Raymond mill machine structure is composed of host, analysis machine, plumbing, air blower, according to user needs can be equipped with crusher, elevator, electromagnetic vibrating feeder, electric motor, etc.Material after crushed to the required size, the elevator will material sent to the storage hopper, then through evenly continuous the vibrating feeder will be expected to host grinding room, due to the effect when rotating centrifugal force, roller swing outward, press in grinding ring, shovel knife scooping up material to between grinding roller and grinding ring, crushed by roller rolling to achieve.After grinding of powder material with the wind circulation of blower analysis machine for sorting, fine through the coarse material fall back into heavy grinding, qualified fine powder with airflow into the finished product cyclone collection of powder, the powder discharge tube, is the finished product.In grinding indoor by grinding material has certain moisture content, when grinding heat production, moisture evaporation, and the pipeline interface is not tight, air is sucked into the outside world, increase circulation pressure, guarantee the mill work under negative pressure condition, the increase of gas flow through duct work into dust catcher, purified the back into the atmosphere.
1. The raymond mill occupies a small area and is strong in package. It can be separated from the block material into the finished packaging and can be independently produced.
2. The particle size of the finished product can reach more than 99 %, which is not suitable for other grinding machines.
It is easy to adjust to the material, easy to adjust, small volume, light weight, low power saving and convenient maintenance.
4. Centralized control selection is adopted in electric power, and no operation can be realized in the main engine room.
5. The main transmission device adopts the airtight reducer, the transmission is stable, the operation is reliable, and the oil is not leaking.
6. The host blade is always in contact with the material at the time of operation, so it is made up of the top and bottom two parts, and the connecting bolts can be replaced after the wear of lower seat.