Tire shredding machine in bulk waste tires recycling, played a leading position, is now the most promising pieces shredding machine shop equipment, tire shredding machine spindle could present twists and turns, at that time?
What about the torsion of the main shaft of the tire shredder?
First of all, what is the damage to the main shaft of the tire shredder?
1. Influence the number of life of the main axis; 2. The blade will be dry and cut, and the blade will be used for life; 3. Influence the standard of processing materials; 4. Reduce the number of life of bearing; 5. Not easy to install; 6. If the speed reducer is selected, the number of life of the reducer will be reduced; Choose the belt transmission, easy to jump belt, reduce the use of the triangle belt.
What to do after the main shaft of the tire shredder:
1. Use the press to proofread the fourth paragraph.
2. Use the four-jaw chuck to hold the fifth paragraph, choose the base frame support structure to support the third paragraph, and find the fourth part of the base. Hit the base eye, then use the thimble to resist, remove the base frame, the first paragraph of the fine car, the third paragraph, the rough car seat some.
3. Main shaft change processing. Use the four jaw chuck to hold the first paragraph, choose the base frame support structure to support the fifth paragraph, the fourth base will be found. Hit the base eye, then use the thimble to resist, remove the base frame, fine car the fifth paragraph, the thick car seat some. Finish machining process.
Therefore, the tire shredder should be strict to ensure the accuracy of the spindle, so as to ensure the service life of the equipment and add customer satisfaction.