Thefactorsthataffecttheshreddingabilityofplasticshredderarethose.

Plastic pieces of shredder capacity for plastic shredder is very important, whether for what plastic shredder, the user to look at the same time, the performance of also to measure the pieces of plastic shredder capacity. Because shredding ability is directly related to the value of plastic shredder. So what are the factors associated with the shredding of the plastic shredder? So let's talk about that.
1. Hardness of materials.
The harder it is, the harder it is to break, and the slower it is, even if it is a biaxial plastic shredder with razor-sharp blades. Moreover, the greater the hardness of the material, the greater the wear of the blades and other accessories, thus making it more difficult to smash.
2. Humidity of materials.
If there is too much water in the material, it is easy to stick to the biaxial plastic shredder when it is crushed, which increases the resistance of the machine running. The internal adhesion powder of the machine can even clog during the feeding process, which seriously affects the crushing capacity of the biaxial plastic shredder.
3. Fineness of material after crushing.
The higher the fineness requirement, the greater the crushing load of the biaxial plastic shredder, the smaller the crushing capacity.
4. Composition of materials.
In the working process of biaxial plastic shredder, fine powder is easily adhered to inside, so the more fine powder is, the more influence it has on the crushing capacity of biaxial plastic shredder. That means the more fine powder contained in the pre-crushing material, the more affected the crushing capacity of the biaxial plastic shredder. We recommend that the material contain too much powder, and it is best to sift it before shredding.
5. The greater the viscosity of material the viscosity of the material, the easier the powder in biaxial plastic shredder internal adhesion, thus increasing biaxial plastic shredder crushing resistance, which affects the efficiency of crushing.
6. Wear resistance of broken pieces (hammer head and jaw).
The better the wear resistance of the broken pieces (hammer head and jaw) of the crushing equipment, the greater the crushing capacity of the biaxial plastic shredder, and the smaller the crushing capacity of the biaxial plastic shredder.
Today talking about here is drawing to a close, I hope all friends can know more about plastic shredder, better to use plastic shredder, finally, if you are interested in us, we are very hope that friends and we communicate with each other, learning. We also welcome friends to visit our factory.