Garbage shredding machine blade is the center of the equipment, in the process of producing simple present the phenomenon of card machine belt material, once encounter will stop check card machine, so how in does not affect yield power under the premise of correct disassembling machine? The disassembly is not in place, and the blade is misaligned. In the process of machine operation, it also affects the service life of the blade. The quality of the cutting tool directly affects the processing cycle of the shredder equipment and the operation of the material, and the cutting of different materials with different tool blades. So how does the garbage shredder blade not affect the production power?
Garbage shredder
1. The alloy head has a sharp and flexible cutting edge, so it is necessary to be careful to protect the alloy head from damage in the moving, equipment and disassembling process of the blade.
2. Check the radial runout of the main shaft of the shredder (+ 0.02mm) and the amplitude (+ 0.01mm) to ensure that the garbage shredder blade is in line with each other.
It is necessary to remove the sundries on the main shaft and flange before the blade equipment. Flange surfaces shall be flat, clean and perpendicular to each other.
4 shipment maybe bigger flange try our best to make the saw blade work more smoothly, intrusive with flange plate, flange intrusive for saw blade diameter 1/3 (flange) thin blade appropriate chooses 1/2 d better cutting effect (especially thin blade).
After smooth, 30 seconds should be idled, and then the cutting operation will be started after all normal.
6. The flange nut must be elastic and moderate, and it will be skidded when the blade is rotated. It will have an internal wound or deformation that will affect the cutting action. Before cutting, it is necessary for the operator to bring protective equipment (protective glasses, dust respirator, safety helmet, protective gloves) and check whether the saw protection cover is intact.
Related Products
Email
Telephone
Leave Message
