The main shaft of the rubber shredder is one of the very important structures on the rubber shredder. Therefore, it is necessary to pay attention to its correction work. If the main shaft is bent, it will have very serious consequences.
Below we will also introduce how to carry out the spindle correction of the rubber shredder. Let's take you to understand.
The main shaft of the rubber shredder is one of its important structures. The influence of the bending of the main shaft:
1. Affect the service life of the spindle;
2.The blade produces interference cutting, which reduces the service life of the blade;
3. Affect the size of processed materials;
4. Reduce bearing service life;
5. Not easy to assemble;
6. If the reducer is directly connected, the service life of the reducer will be reduced; the belt drive is adopted, which is easy to skip and reduce the service life of the V-belt.
Therefore, the spindle accuracy must be strictly required to ensure the service life of the equipment, increase the yield, and meet customer requirements.
The correction steps of the rubber shredder are as follows:
1. Use a press to correct the fourth segment.
2. Use a four-jaw chuck to clamp the fifth section, use a center frame support structure to support the third section, and align the center of the fourth section. Punch the center hole, then use a thimble to hold it, remove the center frame, finish the front section, the third section, and the empty part of the rough car.
3. Spindle head-changing processing. Use a four-jaw chuck to clamp the front section, use the center frame support structure to support the fifth section, and align the center of the fourth section. Punch the center hole, then use a thimble to hold it, remove the center frame, and finish turning the fifth section and the empty part of the rough turning.
As a professional shredder manufacturer and supplier, Shuguang Heavy Machinery's waste shredder can shred common domestic waste, and has a special production line to treat waste tires into small particles, which are used as raw materials in many fields.Welcome to contact us for more details.
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: 0086-371-67666667、67666660
Mobile phone: 0086-13523465141