Career

NEWS

Working principle of 1000 type metal shredder

ShuGuang

Shredder has many specifications, among which the smaller configuration and the more commonly used is the 1000-type metal shredder, which is relatively cheap. The following explains the working principle of the 1000 metal shredder and the concept of the shredder reducer.
 
I. Working principle of 1000 type metal shredder
 
The 1000-type metal shredder uses the basic principle of hammer hitting. The feeding port is provided with a filter conveyor. Driven by a high-speed and high-torque motor, the hammer on the rotor of the host machine takes turns to hit the objects to be crushed into the cavity. Through the space formed between the liner and the hammer head, the object to be crushed is torn into a crushed object conforming to the specifications.
 
 
According to the working condition of the crusher, it can be divided into dry system, wet system and semi-wet system. The dry system mainly means that the crushed material must pass through the air cyclone sorting system to separate the metal and non-metal, and the whole system is equipped with a dust removal device. The wet system refers to spraying water while crushing, and spraying and cleaning while sorting.
 
2.The introduction of 1000 metal shredder reducer
 
The reducer of the shredder is an important part of the equipment. It has a direct relationship with the output value and the particle size of the product. Here is a brief explanation:
 
 
1. Before the installation, acknowledge whether the motor and the reducer are intact, and strictly check whether the dimensions of the parts connecting the motor and the reducer match. Here are the dimensions and tolerances of the positioning boss of the motor, the input shaft and the groove of the reducer.
 
 
2. Unscrew the screw on the dustproof hole on the outer side of the reducer, adjust the PCS system clamping ring so that the side hole is aligned with the dustproof hole, and screw it into the hexagon. After that, remove the motor shaft key.
 
 
3. Connect the motor and reducer naturally. When connecting, it is necessary to ensure that the concentricity of the reducer output shaft and the motor input shaft are common, and the outer flanges of the two are parallel. As the heart is not the same, it will cause the motor shaft to break or the reducer gear to wear.
 
Zhengzhou Shuguang Heavy Industry Machinery Co., Ltd. provides services such as the installation and testing of double shaft shredders, and accepts free technical consultation 24 hours a day to escort your entire production process. Everyone is welcome to come to the company's production base for site inspections and personal test runs.
 
Factory Address: Longjiang West Road, Shangjie District, Zhengzhou City
Contact number: +86-371-67666660 676667
Mobile phone: 0086 13523465141
After-sales Service Department: 0371-67666667