mobile:0086-371-67666667

0086-371-67666667

Location: HOME > Products > Shredding Equipment > Waste garbage shredder

Waste garbage shredder

Waste garbage shredder

Applied MaterialFeeding Size

Device ConfigurationProcessing Capacity0.5-50t/h

Applied Material:all kinds of solid waste

24-hour consultation hotline:0086-371-67666667

Get a quote

Production Introduction

The waste garbage shredder is suitable for the crushing operation of municipal domestic waste, electronic waste, industrial waste, agricultural waste, medical waste and so on. It has the advantages of environmental protection, energy saving, high efficiency, low dust, low maintenance cost and safe operation. Garbage shredder can effectively deal with all kinds of solid waste. The particle size of the crushed material is uniform, which can achieve the purpose of crushing and destroying and improving the incineration efficiency.

Equipment features

1.Heavy moving knife, high crushing power, cutting tools are made of alloy steel casting, strong and long service life.

2.The frame plate is thick, can resist high torque, and is very strong.

3.Using microcomputer (PC) automatic control, with start, stop, reverse and overload automatic reverse control functions.

4.The equipment has the characteristics of low speed, large torque, low noise, and dust can reach environmental protection standards.

5.Easy to adjust, low maintenance cost, economical and durable.

6.The thickness of the tool and the number of claws can be changed according to different materials.

Technical data

Model Blade(mm) Power(kw) Rotating Speed(r/min) Yield(t/h) Finished product(mm) Weight(t)
YH-500 220 7.5*2 10-14 0.5-1 2-10 2.5
YH-600 300 22*2 10-14 1-1.5 2-10 4.5
YH-800 400 30*2 10-14 2-2.5 3-10 6
YH-1000 400 37*2 10-14 2-4 3-10 7.5
500 45*2 10-14 2-6 3-10 9
YH-1200 500 55*2 7-14 3-6 3-10 12
600 75*2 7-14 5-10 4-10 16
YH-1500 600 90*2 7-14 10-16 4-10 23
YH-2000 600 110*2 5-14 15-25 7-20 28
700 160*2 5-14 20-50 7-20 35

Operation precautions

First: The shredder must feed evenly during the feeding process. If it is too fast, it may cause blockage of the equipment, which will affect the normal operation and use of the shredder.

Second: During the feeding process, always pay attention to the large deflection point of the ammeter pointer. If it exceeds the rated current, it means that the motor is overloaded, and the motor will be burned if overloaded for a long time. In this situation, the feed door should be reduced or closed immediately, or the feed method can be changed, and the feeder can be controlled by adding a feeder;

Third: The discharge pipeline is not smooth and blocked. Feeding too fast will block the tuyere of the single-shaft shredder; improper matching with the conveying equipment will cause the discharge pipeline to be blocked due to weakened wind and seamless flow. After faults are found, the unmatched conveying equipment should be cleaned up first, and the feed rate should be adjusted to restore the normal operation of the shredder.


Case show