Industrial shredder
  • Industrial shredder
  • Industrial shredder

Industrial shredder

Made in China

  • Operating Weight:
  • Engine Power:
  • Bucket Capacity:
  • Our products are of superior quality and reasonable price!
  • 24-Hours Online!
  • Global Service Network
  • Professional technical support
1.Brief Introduction
Double shaft shredder is used in crushing plastic,metal,tire,rubber,aluminum,fiber, paper, wood, large-scale hollow material (plastic and other large container), and a variety of mixed waste, especially waste containing metal and so on;
In detail,such as metal drum,freezer,car body,scrap steel;water bottle,PET bottle,oil and gas bottle,any plastic bottle is ok;wood scrap,wood pallet,plastic shell,metal sheel,cylinder head,aluminum panel,cable,metal bucket,wood board,woven bag,nylon net,rag,rope etc.

2.Structure
The shredding machine consists of blade sets,bearing housing,support frame,feeding system,
Power system,electric control system and so on.

3.Features
A:The special design with enough power,it can ensure the production.
B The shredder with low running cost and long lifetime.
C And this machine adopt PCL control system,ensure the efficiency and control power,it is  easy to operate.
D Materials of knives is 9 Crsi,it is endurable.

4.Working Principle
The material will be transferred to the blades assemble box by conveyors,there are many 
knives in the assemble box,and the material will be tear,extrusion,shear and other integrative action,then the small pieces material will be out from the bottom of the shredder.


Type
 
Feed Size(mm)
length * width * height
 
Power(kw)
Blade Size
Diameter(mm) Thickness(mm)
SG600 ﹤500*500*3 7.5-18.5 300-600 20-40
SG800 ﹤700*700*5 15-45 300-600 20-40
SG1000 ﹤800*800*8 30-55 300-700 30-100
SG1200 ﹤1000*800*10 30-90 300-700 40-100
SG1500 ﹤1000*1200*20 37-90 400-700 40-100
SG1800 ﹤1200*1500*25 55-110 500-700 40-100
SG2000 ﹤1500*1600*30 90-132 500-700 50-100
Note1:The final configuration of each model is determined by the size of the blade;
Note2:The size of feed material must be within the tearing capacity of each model;
Note3:The size of finished materials produced by different size cutters is different;
Note4:No matter what kind of material needs to be fed evenly;
Note5:Solid metal materials must be customized according to material size.